Brocade Virtual ADX Security Guide (Supporting ADX v03.1.00) - Manual (Page 157)

Brocade Virtual ADX Security Guide 145
53-1003250-01
SSL debug and troubleshooting commands
6
Using Rconsole
To access the display command that present this information, you must enter the BP console using
the rconsole command as shown.
Virtual ADX# rconsole 1 1
Syntax: rconsole slot bp
The slot variable specifies the number of the slot that the ASM is installed in whose BP console you
want to access.
The bp variable specifies the number of the barrel processor whose BP console you want to access.
Displaying proxy debug counters
Use the show cp debug command in the rconsole mode to display connection proxy debug counters
as shown in the following.
Syntax: show cp debug
Displaying proxy statistics
Use the show cp statistics command in the rconsole mode to display connection proxy statistics, as
shown in the following.
Syntax: show cp statistics
Virtual ADX#rconsole 1 1
Virtual ADX1/1#show cp debug
CPU high water mark reached, SYN dropped [ 10]: 29991204
session alloc failed [ 36]: 1607078
server sock error or timeout [ 84]: 8
client sock error or timeout [ 85]: 525
Virtual ADX# rconsole 1 1
Virtual ADX1/1# show cp statistics
Client-side counters:
SSL conn established : 24190 SSL handshake done : 17630
TCP conn established : 0 data rx : 17589
rx blocked : 17589 rx unblocked : 13443
save data (await srv con) : 17259
data tx done : 13394 no tx data to send : 730
data tx pending : 13394 ready to tx data : 13394
data mv pending : 0 data mv done : 0
closed conn : 19941 remote closed conn : 20044
RST rcvd : 0 RST sent : 4265
conn close complete : 19925 sock error or timeout : 0
Server-side counters:
conn established : 13811 data rx : 13497
rx blocked : 13394 rx unblocked : 13394
data tx done : 13430 no tx data to send : 0
data tx pending : 13408 ready to tx data : 13430
data mv pending : 0 data mv done : 0
closed conn : 20034 remote closed conn : 15261
RST rcvd : 49 RST sent : 3500
conn close complete : 18989 sock error or timeout : 1652