Brocade Virtual ADX Security Guide (Supporting ADX v03.1.00) - Manual (Page 151)

Brocade Virtual ADX Security Guide 139
53-1003250-01
Configuration examples for SSL Termination Mode
6
Disabling Nagle’s Algorithm
You can disable Nagle’s algorithm within a TCP profile as shown in the following example.
Virtual ADX(config)#tcp profile tcpprofile1
Virtual ADX(config-tcp-profile-tcpprofile1)#nagle off
Syntax: [no] nagle off
Disabling the delayed ACK algorithm
You can disable the delayed ACK algorithm within a TCP profile as shown in the following example.
Virtual ADX(config)#tcp profile tcpprofile1
Virtual ADX(config-tcp-profile-tcpprofile1)#delayed-ack off
Syntax: [no] delayed-ack off
Disabling PUSH flag in outgoing data packets from the TCP transmit queue
You can disable setting PUSH flag in all outgoing data packets except when emptying the TCP
transmit queue, as shown in the following example.
Virtual ADX(config)#tcp profile tcpprofile1
Virtual ADX(config-tcp-profile-tcpprofile1)#push-bit off
Syntax: [no] push-bit off
Modifying TCP receive queue size
You can modify the TCP receive queue size, as shown in the following example. The default value is
28000 bytes.
Virtual ADX(config)#tcp profile tcpprofile1
Virtual ADX(config-tcp-profile-tcpprofile1)#rxbuf-size size-in-bytes
Syntax: [no] rxbuf-size size-in-bytes
Modifying TCP transmit queue size
You can modify the TCP transmit queue size, as shown in the following example. The default value
is 20000 bytes.
Virtual ADX(config)#tcp profile tcpprofile1
Virtual ADX(config-tcp-profile-tcpprofile1)#txbuf-size size-in-bytes
Syntax: [no] txbuf-size size-in-bytes