Brocade Virtual ADX Security Guide (Supporting ADX v03.1.00) - Manual (Page 158)

146 Brocade Virtual ADX Security Guide
53-1003250-01
SSL debug and troubleshooting commands
6
Displaying authentication statistics
Use the show ssl authentication-stats command in rconsole mode to display authentication
statistics about certificate verification on the Brocade Virtual ADX. This information is relevant in
the case of client certificate verification (on the client side).
Syntax: show ssl authentication-stats
Displaying locally stored SSL certificates
Use the show ssl certificate command to display locally stored SSL certificates, as shown in the
following.
Syntax: show ssl certificate certificate-file-name | *
The certificate-file-name variable specifies the name of the certificate you want information about.
Selecting the * parameter displays a list of all locally stored certificates.
Virtual ADX#rconsole 1 1
Virtual ADX1/1#show ssl authentication-stats
SSL certificate verification counters:
Success : 18384 Failure : 0
Unknown user : 0 Signature failed : 0
Certificate expired : 0 Certificate revoked : 0
Cert not yet valid : 0 Cert signature failed : 0
Issuer pubkey decode fail : 0 Self signed cert : 36768
Issuer cert not found : 0 Subject Issuer mismatch : 0
Certificate untrusted : 0 Cert chain too long : 0
Cert not sent by peer : 0
CRL counters:
CRL load failed : 0 CRL signature failed : 0
CRL not found : 0 CRL not yet valid : 0
CRL expired : 0
Virtual ADX#show ssl certificate *
ssl certificate files:
1 : cert3003.pem
2 : cert2112.pem
3 : cert2031.pem
4 : cert4030.pem
5 : cert3301.pem
6 : cert3220.pem
7 : cert2410.pem
8 : cert2014.pem
9 : cert4013.pem
10 : cert3203.pem
11 : cert3122.pem
12 : cert3041.pem
13 : cert2312.pem
14 : cert2231.pem
15 : cert2150.pem
16 : cert3501.pem