Brocade DCX 8510-8 Backbone Hardware Reference Manual - Manual (Page 34)

FIGURE 4 Configuration tasks
Establishing a serial connection to the Brocade DCX 8510-8
To establish a serial connection to the console port on the Brocade DCX 8510-8, complete the
following steps.
1. Verify that the Brocade DCX 8510-8 is powered on and that POST is complete by verifying that all
power LED indicators on the port, control processor, and core switch blades display a steady green
light.
2. Remove the shipping cap from the CONSOLE port on the active CP. Use the serial cable provided
with the Brocade DCX 8510-8 to connect the CONSOLE port on the active CP to a computer
workstation. The active CP blade is indicated by an illuminated (blue) LED.
Establishing a serial connection to the Brocade DCX 8510-8
34 Brocade DCX 8510-8 Backbone Hardware Reference Manual
53-1002180-07