Memory specifications, Fibre channel port specifications – Brocade 6510 Hardware Reference Manual User Manual
Page 47
Supported optics, speeds, cables, and distances (Continued)
TABLE 10
Transceiver
type
Form
factor
Speed
Multimode
media (62.5
microns)
(OM1)
Multimode
media (50
microns)
(OM2)
Multimode
media(50
microns)
(OM3)
Multimode
media(50
microns)
(OM4)
Single
mode
media (9
microns)
SFP+
8 Gbps
N/A
N/A
N/A
N/A
10 km (6.2
mi.) or 40
km (24.8
mi.)
SFP+
10 Gbps N/A
N/A
N/A
N/A
10 km (6.2
mi.)
SFP+
16 Gbps N/A
N/A
N/A
N/A
10 km (6.2
mi.)
Up to 7500 km at 2G is supported when using long distance transport system such as DWDM.
Memory specifications
The Brocade 6510 has three primary types of memory devices, boot flash, compact flash, and main
memory. The size of each is listed in the following table.
Brocade 6510 memory specifications
TABLE 11
Memory type
Amount
Boot flash
4 MB
Compact flash
1 GB
Main memory (DDR2 SDRAM)
1 GB, 64-bit with 8-bit ECC
Fibre Channel port specifications
The Fibre Channel ports in the Brocade 6510 are compatible with SWL, LWL, and ELWL SFP+ (for 16
Gbps performance) transceivers. The strength of the signal is determined by the type of transceiver in
use.
The ports meet all required safety standards. For more information about these standards, see
on page 51.
The ports are capable of operating at 2, 4, 8, or 16 Gbps depending on SFP+ models and are able to
autonegotiate to the maximum link speed.
Memory specifications
Brocade 6510 Hardware Reference Manual
47
53-1002174-08