Brocade 6510 Hardware Reference Manual - Manual (Page 45)

Environmental requirements
The following table lists the acceptable environmental ranges for both operating and nonoperating (such
as during transportation or storage) conditions.
Environmental requirements TABLE 8
Condition Acceptable during operation Acceptable During Non-Operation
Ambient
Temperature 0º to 40º C (32º to 104º F) -25º to 70º C (-13º to 158º F)
Humidity 10% to 85% RH non-condensing, at 40º C (104º F) 10% to 90% RH non-condensing, at
70º C (158º F)
Altitude 0 to 3 km (9,842 feet) above sea level 0 to 12 km (39,370 feet) above sea
level
Shock 20 G, 6 ms, half-sine wave 33 G, 11 ms, half-sine wave, 3/eg
Axis
Vibration 0.5 G sine, 0.4 gms random, 5-500 Hz 2.0 G sine, 1.1 gms random, 5-500
Hz
Air flow Maximum - 71.36 cmh (42 cfm)
Nominal - 59.47 cmh (35 cfm)
NOTE: Airflow can be Forward or Reverse
depending on purchased option
NA
Heat dissipation 338 BTU/hr (32 port configuration)375 BTU/hr (48
port configuration) NA
General specifications
The following table lists the general specifications for the Brocade 6510.
General specifications TABLE 9
Specification Description
Configurable port types F_Port, E_Port, M_Port, EX_Port, and D_Port
System architecture Nonblocking shared-memory switch
System processor PowerPC 440EPx @ 667 MHz
ANSI Fibre Channel protocol FC-PH ( Fibre Channel Physical and Signalling Interface standard)
Environmental requirements
Brocade 6510 Hardware Reference Manual 45
53-1002174-08