Yokogawa Button Operated DX2000 - Manual (Page 43)

41
IM 04L42B01-02E
Writing the Message “START”
Registering the Word “START” in Message Number 1
On a DX with advanced security (/AS1 option; release number 4 or later), this operation
is only available when memory sampling is stopped.
1. Press MENU (to switch to setting mode), and select the Menu tab > Message,
Comment > Message > DISP/ENTER .
2. Press 1-10 soft key.
The message, “Message numbers 1-10 can also be used for free message” appears. Press
DISP/ENTER.
3. Press the down arrow key. With message 1 selected, press the Input soft key.
Enter “START”.
Show the message
registration window.
Select the digit: Left and right arrow keys
Enter characters: Character/Number input keys
Delete a character: Del soft key or Bs soft key
Cancel the setting: Press ESC before pressing DISP/ENTER.
For the input procedure, see “Entering Values and Characters” on page 16.
4. Press DISP/ENTER.
5. Press ESC three times or MENU twice to return to the operation mode screen.
On a DX with advanced security (/AS1 option; release number 4 or later):
Press ESC three times or MENU twice to display a confirmation screen. To return
to the operation mode screen, select Yes, and press DISP/ENTER.
Operation complete.
Operation