Yokogawa Button Operated DX2000 - Manual (Page 18)

16
IM 04L42B01-02E
Run Modes
Power ON
Basic setting mode
MENU key
or ESC key
DISP/ENTER
key
DISP/ENTER
key
ESC key
Setting menu
display
Basic setting
menu display
Setup display
Operation display
Setup display
Setting mode Operation mode
MENU key
MENU key
or ESC key
Mode Transition Diagram
End menu > DISP/ENTER or
ESC > DISP/ENTER
(release number 3 or later)
Hold down FUNC
for 3 s or
Basic Setting Mode
> DISP/ENTER
(release number 3
or later)
On a DX with advanced security
(/AS1 option; release number 4 or later):
MENU key or ESC key > DISP/ENTER
or
End menu > DISP/ENTER
The DX has three modes.
Mode Description
Operation mode A mode for performing measurements.
Setting mode A mode in which input range, measurement method, and so on
are configured. Settings can be changed when memory sampling
is in progress excluding some items.
Basic setting mode A mode used to set basic items such as the scan interval and
storage format of measured data. On a DX with advanced
security (/AS1 option; release number 4 or later), the login
settings can be changed during memory sampling.
* For further details on the basic setting mode and setting mode, see page 67.
Carry out the steps given in the following pages. It will help you to understand the DX
operation.
Entering Values and Characters
The character/number input keys and DISP/ENTER key are used to set the date/time,
set the display span of the input range, set the tag, set the message string, enter the
password, etc.
DISP/ENTER key and four arrow
keys (up, down, left, and right) Character/Number input keys
Basic Operation