Yokogawa Button Operated DX2000 - Manual (Page 24)

22
IM 04L42B01-02E
Operation Example in the Basic Setting Mode: Changing the Scan Interval
In this example, we will change the scan interval. Here, the scan interval on the DX2010
is changed to 2 s. The selectable scan intervals are different on the DX2004 and
DX2008, but the procedure is the same.
Type T
thermocouple Channel 2
Measures every 2 s
DX2000
1. Display the operation mode screen.
2. Press MENU once to display the setting menu.
3. Hold down FUNC for at least 3 s.
Display the basic setting
mode menu
Alternatively, you can
execute the following
procedure to switch to
Basic Setting mode.
Use the up or down arrow
key to select Basic setting
mode on the Menu tab,
and press DISP/ENTER.
A confirmation window will
appear. Select Yes, and
press DISP/ENTER.
4. Press the down arrow key twice to select A/D, Memory.
Basic Operation