Yokogawa Button Operated DX2000 - Manual (Page 29)

27
IM 04L42B01-02E
Press ESC or MENU twice to display a confirmation screen. To return to the
operation mode screen, select Yes, and press DISP/ENTER once.
Operation complete.
Loading the Setup Data
In this example, we will load the setup data “SF2” from the CF card and update the DX
settings.
This procedure only loads the setup data that the DX uses for setting mode.To load the
setup data for both setting mode and basic setting mode, press
MENU, hold down FUNC
for 3 s, select the File/Initialize tab > Load settings, and press DISP/ENTER.
1. Display the operation mode screen.
2. Press MENU once to display the setting menu.
3. Press the right arrow key once to select the File tab.
4. Press the down arrow key three times.
Select Load settings
5. Press DISP/ENTER once to select the root directory (CF:/).
6. Press DISP/ENTER once to display the files in the root directory.
7. Select the file SF2 using the up and down arrow keys.
To move to a lower
directory, select the
directory, and press
DISP/ENTER.
To move to a higher
directory, press ESC.
8. Press DISP/ENTER once. The message “File is being loaded from media”
appears, and the setup data is loaded. The DX automatically returns to the
operation mode screen.
Operation complete.
Basic Operation