Yokogawa Touch Screen GP20 - Manual (Page 6)

4
IM 04L51B01-02EN
TCP/IP Software
GX10, GX20, GP10, GP20 Paperless Recorder
The TCP/IP software of GX/GP and the document
concerning the TCP/IP software have been developed/
created by Yokogawa based on the BSD Networking
Software, Release 1 that has been licensed from
University of California.
eFont
The monitoring function of the following products uses
eFont data for the character representation.
In accordance with the eFont license agreement, the
copyright notice, redistribution conditions, and license are
listed below.
GX10, GX20, GP10, GP20 Paperless Recorder
(c) Copyright 2000-2001 /efont/ The Electronic Font
Open Laboratory. All rights reserved.
Redistribution and use in source and binary forms, with
or without modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain the
above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or
other materials provided with the distribution.
3. Neither the name of the team nor the names of its
contributors may be used to endorse or promote
products derived from this font without specific prior
written permission.
THIS FONT IS PROVIDED BY THE TEAM AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE TEAM OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS
FONT, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE
Handling Precautions of the GX/GP
• Use care when cleaning this instrument, especially
its plastic parts. Use a soft dry cloth. Do not use
organic solvents, such as benzene or thinner, or
other cleansers. They may cause discoloring and
deformation.
• Keep electrically charged objects away from the signal
terminals. Doing so may damage the GX/GP.
• Do not apply volatile chemicals to the display, panel
keys, etc. Do not allow rubber and vinyl products to
remain in contact with the GX/GP for long periods of
time. Doing so may damage the GX/GP.
• When not in use, make sure to turn off the power
switch.
• If there are any symptoms of trouble such as strange
odors or smoke coming from the GX/GP, immediately
turn off the power switch and the power supply source.
Then, contact your nearest Yokogawa dealer.
SD Memory Card Handling Precautions
• SD memory cards are delicate and should be handled
with caution.
• Yokogawa provides no warranty for damage to, or loss
of data recorded on the SD memory card, regardless
of the cause of such damage or loss. Please always
make backup copies of your data.
• Do not store or use the SD memory card in places with
static electricity, near electrically charged objects, or
where electrical noise is present. Doing so can result in
electric shock or damage.
• Do not disassemble or modify the SD memory card.
Doing so can result in damage.
• Do not physically shock, bend, or pinch the SD memory
card. Doing so can lead to malfunction.
• During reading/writing of data, do not turn OFF the
power, apply vibration or shock, or pull out the card.
Data can become corrupt or permanently lost.
• Only use Yokogawa SD memory cards. Operation
cannot be guaranteed with other brands of card.
• When inserting the SD memory card into the
instrument, make sure you orient the card correctly
(face up or down) and that you insert it securely. If not
inserted correctly, the card will not be recognized by
the instrument.
• Never touch the SD memory card with wet hands.
Doing so can lead to electric shock or malfunction.
• Never use the SD memory card if it is dusty or dirty.
Doing so can lead to electric shock or malfunction.
• The SD memory card comes formatted.
SD cards must be formatted according to the standard
established by the SD Association (https://www.sdcard.
org/home). If you want format the SD memory card,
use the instrument’s Format function. If using a PC
to perform the formatting, use the SD card formatter
software available from the above SD Association.
• You can use SD/SDHC cards (up to 32 GB) on the GX/
GP.
SD Memory Card Specifications and Characteristics
Electrical specifications Operating voltage: 2.7 V to 3.6 V (memory
operation)
Supports SD 1-bit, 4-bit mode and SPI mode
* Compliant with SD PHYSICAL LAYER
SPECIFICATION Ver. 3.00.
External dimensions/
weight
H: 32, W: 24, D: 2.1 (mm), weight: approx. 2 g
* Compliant with Standard Size SD Card Mechanical
Specification Ver. 1.00.
Reliability and durability * Compliant with SD PHYSICAL LAYER
SPECIFICATION Ver. 3.00 and Standard Size SD
Card
Mechanical Specification Ver. 1.00.
Operating conditions –25 to 85°C, temp. 25°C, RH=95%, no condensation
Storage conditions –40 to 85°C, temp. 40°C, RH=93%/500 h, no
condensation
Unit: mm
32 ± 0.1
24 ± 0.1
WP
SD
Writable
Write-protected