Yokogawa Touch Screen GP20 - Manual (Page 32)

30
IM 04L51B01-02EN
Web Application
You can open the Web application simply by starting a Web browser (IE6 or IE8), and
specifying the GX/GP IP address. You do not have to install any software. You can do the
following on the Web application.
• Operate the GX/GP
• Monitor data
• Changing setting parameters
For details on configuring the environment settings to connect the GX/GP to an Ethernet
network and how to use the software, see the User’s Manual (IM 04L51B01-01EN).
Starting the Web Application
1
Start the Web browser.
2
In the Address box, enter “http://” followed by the GX/GP IP address.
If DNS is available, you can specify the host name in place of the IP address.
Example: When the IP address is “192.168.1.1,” enter
http://192.168.1.1
in the Address box.
The Web application starts, and the screen appears.
Operation complete
Closing the Web Application
When close the Web browser, the Web application also closes.