Yokogawa Touch Screen GP20 - Manual (Page 17)

15
IM 04L51B01-02EN
Operating Procedure
Dummy covers are
attached to empty slots
(with screws).
Modules (five types)
GX10/GP10: Up to 3 modules can be installed.
GX20/GP20: Up to 10 modules can be installed.
Make the GX/GP recognize the
modules (GX/GP reconfiguration).
Configure signal inputs.
Configure functions as
necessary.
Turn on the power.
Lit in red
Alarm activated
Off: Power off
Lit in blue
Running
(No alarm)
Alternates
If preinstalled, modules are preconfigured.
If you rearrange the modules, reconfigure.
Install modules.
Not required
if preinstalled
Modules not installed Insert until a click is heard
and fasten with screws.*
Modules installed
(10 modules)
Power inlet on
the GP10/GP20
Set the date and time.
Connect I/O signals and power.
Power switch
Manuals for reference
First Step Guide
(IM 04L51B01-02EN)
“Installation and Wiring”
First Step Guide
(IM 04L51B01-02EN)
“Installation and Wiring”
First Step Guide
(IM 04L51B01-02EN)
“Basic Operations”
First Step Guide
(IM 04L51B01-02EN)
“Reconfiguring the
GX/GP”
First Step Guide
(IM 04L51B01-02EN)
“Basic Operations”
First Step Guide
(IM 04L51B01-02EN)
“Basic Operations”
First Step Guide
(IM 04L51B01-02EN)
“Basic Operations”
Recording stopped Recording in progress
Start measuring/recording.
MENU key
Browse tab
Set the date and time.
Start measuring/recording.
Configure input and functions.
Common menu tab
To open, push the front door down and pull it toward you.
or
1 2 3
M3 screw
terminal
GX90XA
Analog input module
GX90XD
Digital input module
GX90YD
Digital output module
Clamp
terminal
M3 screw
terminal
M3 screw
terminal
Clamp
terminal
To prevent electric shock when
wiring, make sure that the power
supply is turned off.
URL: www.smartdacplus.com/manual/en/
Product user’s manuals can be downloaded or viewed at the
following URL;
Paperless Recorder
User’ s Manual
(IM 04L51B01-01EN)
* Recommended tightening
torque: 0.6 N•m
Operating Procedure