Yokogawa Touch Screen GP20 - Manual (Page 13)

11
IM 04L51B01-02EN
Component Names
GX20/GX10
RS-232 terminal
Power inlet (GP10/GP20)
Serial port (/C2 option)
Shows the trend display and other
displays and the setup screen
Starts and stops recording
Press this once to show a menu
for accessing various screens.
USB2.0 compliant. Connect a USB
memory device, mouse, keyboard, etc.
SD memory card (up to 32 GB)
Format: FAT32 or FAT16
A 1 GB card is included.
Use an off-the-shelf door lock key.
GX20 front panel GX10 front panel
GX10 rear panel
GX20 rear panel
LCD
MENU key
MENU key
Stylus pen (touch pen)
Power switch
SD memory card slot
USB port (/UH option)
USB 2.0 compliant. Connect a USB memory device, mouse, keyboard, etc.
USB port (/UH option)
Connect I/O signals.
GX10, GP10: ３ slots (0 to 2)
GX20, GP20: 10 slots (0 to 9)
RS-422/485 terminal
I/O module
Power supply terminal and protective
ground terminal (GX10/GX20)
Serial port (/C3 option)
10BASE-T/100BASE-TX port
Ethernet port
FAIL output terminal (/FL option)
Connects to an external monitor
VGA output connector (/D5 option)
Front door lock
mechanism
I/O module slot
START/STOP key
Front door
A front door is locked/unlocked
by a slide at the bottom.
Lock
Alarms are indicated with a red
LED.