Yokogawa PH72 Personal pH/ORP Meter - Manual (Page 48)

IM 12B03D02-01E
5-13
5. Keypad and Display Functions
(14) Defrag memory (dFLG) panel
Up to 300 data can be stored. Unnecessary data can be individually deleted (refer to Item
(1), “Display stored data”), but this individual deletion does not free up memory
occupied by deleted data. Therefore, may be displayed even though less than
300 data are stored. In such a case, use the defrag function to consolidate data and free
up the space occupied by deleted data, thereby allowing up to 300 data to be stored.
While memory defrag is in progress, do NOT turn off the power. In addition, before
starting memory defrag check that there is enough battery life left to avoid battery
shutoff during memory defrag.
• Procedure
Press F/ENT key on the flashing “dFLG” display. will be flashing. Use
keys to select , then press F/ENT key. While defrag is in progress, “WAIt” may
flash. (It may not flash depending on the amount of deleted data.) When defrag is
complete, “End” appears.
F050314.EPS
to toggle
to
proceed
F/ENT
to cancel F/ENT
to execute F/ENT
After a few
seconds
(may not appear if deleted data amount is small)