Yokogawa PH72 Personal pH/ORP Meter - Manual (Page 40)

IM 12B03D02-01E
5-5
5. Keypad and Display Functions
5.3 Function Mode
Outline
Various functions are supported by function mode. Press F/ENT key while the meter is
in measurement mode to move to function mode.
Note: The last selected and executed item is displayed when you move to function
mode. Use
keys to cycle through the items listed in Table 5.1 in that
order.
Setting Procedures
Use keys to move to the desired item. While the desired item is flashing, press
F/ENT key to access that item panel. To return from function mode to measurement
mode, press MEAS key anytime.
Table 5.1 Function Mode Item List
Default* 2
no dAtA
25 ؇ C
pH
؊
2004, 1 (month), 1 (day)
0 hour 0 minute
oFF
20 min
on
nISt
no
؇ C
؊
؊
For details, refer to:
Item (1)
Item (2)
Item (3)
Item (4)
Item (5)
Item (6)
Item (7)
Item (8)
Item (9)
Item (10)
Item (11)
Item (12)
Item (13)
Item (14)
T0501.EPS
*1: For displayed digital characters, see Alphanumeric Display Table in Preface.
*2: "
؊" denotes that the item is not user configurable.
Item* 1
dAt
M.tP
PV.U
dEL.A
dAtE
tIME
ALM
A.oFF
bZ.o
Std
I.CP
tP.U
VEr
dFLG
Description
Display stored data
Manual temperature setting
Set measurement unit
Delete all stored data
Date setting
Time setting
Alarm time setting
Set Auto Power Off time
Set beep on/off
Standard solution setting
Initialize calibration parameters
Set temperature unit
Check version number
Defrag memory