Yokogawa GC1000 Mark II Process Gas Chromatograph - Manual (Page 18)

<4. Engineering>
4-5
IM 11B06E01-01E
#SLAVE, 1
#RETRY, 3
**** Station
#STN, 1, GC1000, 192.168.1.252, GC1000Mk2(ARCNET)
#STN, 2, GC1000, 192.168.1.252, GC1000Mk1(ARCNET)
#STN, 3, GCIU,
192.168.1.252, GCIU(ARCNET)
#STN, 10, GC1000, 192.168.1.10, GC1000Mk2 at SiteA
#STN, 42, GC1000, 192.168.1.42, GC1000Mk2 at SiteB
#STN, 101, ASIU, 192.168.1.101, ASIU
#STN, 247, PCAS, 192.168.1.252, PCAS(ARCNET)
**** Mapping
#MAP, 1,
1001, 1, RUN
#MAP, 2, 1002, 1, RUN
#MAP, 10, 1003, 1, RUN
#MAP, 42, 1004, 1, RUN
#MAP, 1, 1011, 2, STOP
#MAP, 2, 1012, 2, STOP
#MAP, 10, 1013, 2, STOP
#MAP, 42, 1014, 2, STOP
#MAP, 1, 11001, 10001, Normal
#MAP, 2, 11002, 10001, Normal
#MAP, 10, 11003, 10001, Normal
#MAP, 42, 11004, 10001, Normal
#MAP, 1, 11011, 10002, Error
#MAP, 2, 11012, 10002, Error
#MAP, 10, 11013, 10002, Error
#MAP, 42, 11014, 10002, Error
#MAP, 101, 31002, 30401, AI value of ASIU
**** Alarm DO ouput
#DO,
10, ALM_LVL1, 12, DO_12 output for alarm of Stn10
#DO, 10, ALM_LVL2, 13, DO_13 output for alarm of Stn10
#DO, 42, ALM_LVL1, 3, DO_3 output for alarm of Stn42
Example of mapping file (include ARCNET)
4.2.2 Loading a mapping file
After the installation of ASGW, turn on the power and connect the ASGW to PC with Ethernet
cable.
Open the web browser on PC and input the address of ASGW as http://(IP address of ASGW).
When the diagnostic window of ASGW is displayed, click the “File folder (FTP)”.
FTP windows appears and account and password are required.
Enter the following characters.
Account: “stardom”
Password: “YOKOGAWA”
Mapping file “ASGW_MAP.CSV” is displayed on FTP window.
Move this file to PC.
4th Edition : Nov. 22, 2011-00