4 set the parameters using dtm, Set the parameters using dtm -3 – Yokogawa EJX115A User Manual
Page 12
<2. Connection>
2-3
IM 01C25T01-06EN
● Confirmation by using HART configuration
tool
a) Connect the configuration tool to the
transmitter.
b) Confirm numerical number displayed on
“Fld dev rev” column.
• Procedure to call up the display
DD and DTM
(excluding EJX_
HART 5[1.2])
[
Root Menu (refer to 3.1.1) ]
→ Review →Fld dev rev
EJX_HART 5[1.2]
DTM
Configuration → HART
→Fld dev rev
(2) Confirmation of device revision for the
configuration tool
Confirm the device revision from the installed
DD file name according to the procedure
provided for the configuration tool.
The first two digits indicate the device revision
and the next two digits indicate the DD revision.
0 a 0 2. X X X
DD revision
Device revision
NOTE
Device revision of DD file is given in hexadecimal
2.4 Set the parameters using
DTM
When configure the parameters using FieldMate,
use the DTM (Device Type Manager) shown in the
Table 2.2.
NOTE
The DTM revision can be confirmed by “DTM
setup”.
Device Files is a Media included in FieldMate.
The user registration site provides Device Files
with the latest update programs.
(URL: https://voc.yokogawa.co.jp/PMK/)
In case update, following operation by “DTM
setup” is required.
• Update DTM catalog
• Assign corresponding DTM to the device
(refer to Table 2.2)
Refer to FieldMate Instruction Manual for detail.
Table 2.2
Applicable DTM
File
Applied device
File name
DTM
revision
FDT
revision
Model
HART
protocol
revision
Device type
Device
revision
EJA-NEXT
HART DTM
3.3.0.140 or later
*2
FDT1.2
EJA series
5
EJA-NEXT
(0x5C)
1
EJA-NEXT
FDT2.0
HART DTM
5.0.0.0 or later
*3
FDT2.0
EJA-NEXT
HART 7 DTM
3.3.0.140 or later
*2
FDT1.2
7
EJA-NEXT
(0x375C)
10
EJA-NEXT
FDT2.0
HART 7 DTM
5.0.0.0 or later
*3
FDT2.0
EJXV3.1
1.4.160.8 or later
*1
FDT1.2
EJX series
5
EJX
(0x51)
3
EJX FDT2.0
HART DTM
5.0.0.0 or later
*3
FDT2.0
EJX HART 7
DTM
3.3.0.140 or later
*2
FDT1.2
7
EJX
(0x3751)
10
EJX FDT2.0
HART 7 DTM
5.0.0.0 or later
*3
FDT2.0
*1:
The DTM is included in Yokogawa DTM Library HART 2012-2/Device Files R3.03.03 or later.
*2:
The DTM is included in Yokogawa Device DTM Library 2.3/Device Files R3.03.03 or later.
*3:
The DTM is included in Device DTM Library 4.0 or later.