Watlow Series PD Ethernet Enabled Temperature and Process Controller - Manual (Page 7)

W a t l o w S e r i e s P D
■
5
■
C h a p t e r 2 I n s t a l l a n d W i r e
Series PD Connector Locations
Two connectors on the bottom of the unit provide connection points for the input power, inputs
and outputs. These connectors are removable and each terminal position is numbered.
The RJ-45 connector is located on the top of the Series PD to allow connection to an Ethernet
network.
Input and Output Connectors
Figure 5a — Input and Output Connectors
Ethernet RJ-45 Connector
Figure 5b — RJ-45 Connector
Ethernet RJ-45
Connector
Top View
Input Connector
Controller Power and
Output Connector
Bottom View