Watlow Series PD Ethernet Enabled Temperature and Process Controller - Manual (Page 29)

Declaration of Conformity
Series PD
Watlow Winona, Inc.
1241 Bundy Blvd.
Winona, MN 55987 USA
Declares that the following product:
Designation: Series PD
Model Numbers: PD (D or S) (1, 2 or 3) – (C, F, J or K) (A, C, E or K) (A, C, F, J or K) (A,
C, E or K) – (0 or 1) (any three letters or numbers)
Classification: Temperature control, Installation Category II, Pollution degree 2
Rated Voltage: 24V‡ (ac or dc)
Rated Frequency: 50 or 60 Hz
Rated Power Consumption: 14VA maximum
Meets the essential requirements of the following European Union Directives by using the relevant
standards shown below to indicate compliance.
89/336/EEC Electromagnetic Compatibility Directive
EN 61326: 1997 With A1, 1998, Electrical equipment for measurement, control and lab-
oratory use – EMC requirements (Industrial Immunity,
Class B Emissions).
EN 61000-4-2: 1996 With A1, 1998: Electrostatic Discharge Immunity
EN 61000-4-3: 1997: Radiated Field Immunity
EN 61000-4-4: 1995: Electrical Fast-Transient / Burst Immunity
EN 61000-4-5: 1995 With A1, 1996: Surge Immunity
EN 61000-4-6: 1996: Conducted Immunity
EN 61000-4-11: 1994: Voltage Dips, Short Interruptions and Voltage Variations
Immunity
EN 61000-3-2: ED.2. 2000: Harmonic Current Emissions
EN 61000-3-3: 1995 With A1:1998: Voltage Fluctuations and Flicker
73/23/EEC Low-Voltage Directive
EN 61010-1: 2001 Safety Requirements of electrical equipment for measurement, control
and laboratory use. Part 1: General requirements
Raymond D. Feller III Winona, Minnesota, USA
Name of Authorized Representative Place of Issue
General Manager April 2003
Title of Authorized Representative Date of Issue
Signature of Authorized Representative
(2343)
A2:2002: