Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 5
5
COM2
Recommended Cable
Connector
XM2D-0901
Recommended Jack Screw
XM2Z-0073
Recommended Cable Cover XM2S-0913
Interfit Bracket
#4-40 inch screws are used.
Pin #
RS422/RS485
*1
*1 RS485 is compliant with ST-3400 series units with revision code “A” or later.
Signal Name
Meaning
1
RDA
Receive Data A(+)
2
RDB
Receive Data B(-)
3
SDA
Send Data A(+)
4
ERA
Data Terminal Ready A(+)
5
SG
Signal Ground
6
CSB
Clear to Send B(-)
7
SDB
Send Data B(-)
8
CSA
Clear to Send A(+)
9
ERB
Data Terminal Ready B(-)
Shell
FG
Frame Ground
(Common with SG)
SEE
This manual is related to the following products:
- AGP3400 - 7.5 DIO HMI" AGP3300 - 5.7 DIO HMI" AGP3600 - 12.1 FLEX Network HMIs" AGP3500 - 10.4 FLEX Network HMI" AGP3400 - 7.5 FLEX Network HMI" AGP3600 - 12.1 CANopen HMI" AGP3500 - 10.4 CANopen HMI" AGP3400 - 7.5 CANOpen HMI" AGP3300 - 5.7 CANopen HMI" AGP3300H - 5.7 Handheld HMIs" AGP3750 - 15 Multi-Media HMI" AGP3650 - 12.1 Multi-Media HMIs" AGP3550 - 10.4 Multi-Media HMIs" AGP3450 - 7.5 Multi-Media HMI" AGP3360 - 5.7 Multi-Media HMI" AST3300 - 5.7 Basic HMI" AST3200 - 3.8 Basic HMI" AGP3600 - 12.1 Standard HMIs" AGP3500 - 10.4 Standard HMIs" AGP3400 - 7.5 Standard HMI" AGP3300 - 5.7 Standard HMI" AGP3200 - 3.8 Standard HMI"