Maple Systems HMC7000 Series - Manual (Page 12)

HMC7000 Series Installation Guide
Phone: 425/745-3229 • Fax: 425/745-3429 • Email: [email protected] • www.maplesystems.com
1010-1042 Page 10 of 22 Rev. 02, 09/25/2013
Installing the I/O Expansion Modules
Mounting the expansion modules onto a HMC7000:

The expansion modules have two (2) locking connectors as shown in the diagram below:

Pull out the lock connectors to attach the I/O Expansion module to slots on the HMC7000:
NOTE: you must remove the protective tab directly below the „Expansion Port #‟ label so that the I/O Expansion
interconnect plug can attach to the HMC7000 socket.

Push down the lock connectors to safely secure the I/O Expansion module:
To remove the expansion module, simply pull out the lock connectors (on both sides) and gently pull the
module apart from the HMC.