AMX Wireless Touch Panels (Wave Server) - Manual (Page 78)

68 Touch Panel Program Reference ViewPoint Wireless Touch Panels
5 minutes. The touch panel wakes up when you touch the screen for more
than .5 seconds.
• ViewPoint Module Not functional at this time.
• Module Version VX.XX Shows the ROM firmware version installed in
the ViewPoint.
• Battery Voltage XX.X Shows the voltage level of the Nickel Metal
Hydride rechargeable battery.
• Battery Not Charging/Battery Charging Battery Not Charging
appears when the Nickel Metal Hydride battery is not charging. Battery
Charging appears when the Nickel Metal Hydride battery is charging. The
shaded area in the horizontal gauge button moves from left-to-right as the
battery voltage level increases.
• Supply Voltage VX.XX Shows the voltage level of the external power
supply connected to the ViewPoint.
• AMX RF ON / OFF Toggles RF transmission on or off.
• AMX IR 38 kHz/455 kHz/OFF Toggles the IR transmitting frequency to
38 kHz, 455 kHz, or off.
Wireless Status for VPW-CP and VPW-GS
The WIRELESS STATUS button appears on the Setup page. The ViewPoint provides
two-way RF control and provides one-way IR signaling. The ViewPoint contains a
Nickel Metal Hydride rechargeable battery that supplies independent power to the
touch panel. Press the WIRELESS SETTINGS button to open the page shown in
Figure 92.