AMX Wireless Touch Panels (Wave Server) - Manual (Page 174)

164 Loading Infrared (IR) Files ViewPoint Wireless Touch Panels
4. After the Database has been created, press F5 and select Configure. Figure 216
appears.
5. Select your computer’s Com port and baud rate that you wish to communicate
with the ViewPoint touch panel.
6. Then, press F10.
7. When the Communications screen has disappeared, press F1 on your computer
keyboard. Use the up/down arrow keys and select Change Directory. The dialog
in Figure 217 will appear.
Figure 216
Communications settings
Note
Make sure that the ViewPoint
touch panel is set to the same
Baud rate as your computer.
Figure 217
Change Directory dialog