AMX Wireless Touch Panels (Wave Server) - Manual (Page 75)

ViewPoint Wireless Touch Panels Touch Panel Program Reference 65
• Wave-Pak Not Locked/Locked Appears when an optional WAV-PKM
is connected to the touch panel. Not locked indicates the touch panel is not
communicating with the AXR-WAVES. Locked indicates the touch panel is
locked on (communicating) to the AXR-WAVES connected to the Central
Controller.
• Battery Voltage XX.X Shows the voltage level of the lead-acid
rechargeable battery in the WAV-PK.
• RSSI XXX% Shows the strength of the AXR-WAVES signal received by
the touch panel. The signal strength fluctuates between 0% and 100% as
shown by a horizontal gauge moving from left to right.
• GROUP ID Shows the GROUP ID number on the touch panel used to
communicate with the wireless AXR-WAVES with the same group ID
number. The group ID range is 0 – 15. The group ID setting overrides the
DIP switch setting on the WAV-PK.
• Module Version vX.XX Shows the firmware version installed in the
WAV-PK.
• Fully Charged/Not Charging/Charging Fully Charged appears when
the battery in the WAV-PK is fully charged. Not Charging appears when the
lead-acid battery is not charging. Charging appears when the lead-acid
battery is charging. The shaded area is a horizontal gauge moving from left
to right as the battery voltage level increases.
• Network Eff. XXX% Shows the communication efficiency of bidirectional
RF transmissions between the touch panel and AXR-WAVES. The efficiency
percentage (0–100%) is determined by the number of retries required to
complete a panel operation.
• Device Range Shows the device range that your server can recognize.
Devices outside that range will not be recognized.
• Server Devices XXX Shows the group address for the AXR-WAVES
communicating with the touch panel.
• Server Version Shows the firmware version installed in the AXR-
WAVES.
• Supply Voltage vX.XX Shows the voltage level of the external power
supply (optional) connected to the WAV-PK.
• Device Eff. XXX% Shows the strength of the AXR-WAVES signal
received by the touch panel. The shaded area in the horizontal gauge moves
Note
The GROUP ID number can
be set from the Wireless Set-
tings page in the Protected
Setup page. Refer to the
Wireless settings subsections
for detailed information.
Note
The Network Eff. XXX% and
Device Eff. XXX% information
buttons are the best indicators
of communication.