Progressive International Electronics PIcon II Console User Manual
Page 32
PIcon II
Programming
Rev 1.0
January 2014
27
PROGRAMMING
To avoid accidental mistakes and clearing of previous programming, Program Modes may only
be accessed by using Restricted PIN Code. For basic startup, press
to ensure that the date is correct. If incorrect, change date as explained in Manager Mode
Section. If date is correct, calculate restricted code by multiplying the current month, times the
day, plus the year. For example, if the date were December 10, 2000, the restricted code would
be calculated as follows:
12 X 10 + 2000 = 2120 Restricted access code would be 2120.
When Programming Mode is entered, PGM 0 will appear on the display, prompting for a
Program Mode # to be entered.
Choose among the following and enter corresponding number at the Program Mode prompt.
PGM 1 — Pump Type
PGM 2 — Pump Configuration
PGM 3 — Product Name Assignment
PGM 4 — Set Dollar/Volume Default
PGM 5 — Set Dollar/Cash or Credit
PGM 6 — Set Gallon/Litre Receipt
PGM 7 — Handle for Authorization
PGM 8 — Set $/V/PPU Decimals
PGM 9 — Set Language
PGM 10 — Stacked Sales (Y/N)
PGM 11 — ATG Activation
PGM 60 — Pump Specific Settings