Progressive International Electronics PIcon II Console - Manual (Page 21)

PIcon II Manager
Rev 1.0 January 2014 16
Manager Mode MGR 1 — Program Product Price
To enter this mode from the mode number prompt, MGR 0, enter <1> on the keypad and
press . Prices may be set for the following:
Cash PPU — To set the Cash PPU for a product, enter the desired PPU on the numeric
keypad and press the key. The three decimal places are assumed.
Credit PPU — To set the Credit PPU for a product, enter the desired PPU on the numeric
keypad and press the key. The three decimal places are assumed.
As the Cash and Credit PPUs are entered, numeric key errors may be erased by pressing the
key . The value will appear in the display. Note: Both Cash and Credit prices
must be programmed for each product — even if prices are the same.
To exit Mode 1, press the key. MGR 0, the mode entry prompt, will appear
on the display. To return to operator mode, press the key again.
Manager Mode MGR 2 — Read Reports (Refer to Reports Section, Read Reports)
Manager Mode MGR 3 — Print Reports (Refer to Reports Section, Print Reports)
Manager Mode MGR 4 — Clear Resettable Totals
MGR 4 is used to reset resettable totals by clearing them to zero. To enter this mode from the
mode number prompt, MGR 0, enter <4> on the keypad and press .
The display will show Press CLEAR. To zero all resettable totals, proceed by pressing
. To exit Mode 4, press the key. MGR 0, the mode entry prompt,
will appear on the display. To return to operator mode, press the key again.