Progressive International Electronics PIcon II Console - Manual (Page 22)

PIcon II Manager
Rev 1.0 January 2014 17
Manager Mode MGR 5 — Set Date and Time
MGR 5 allows the setting of time, date and year. To enter MGR 5 from the MGR 0 mode
number prompt, press <5> and press . Date and time may now be set.
Time — The time previously set in the PIcon II will be displayed. To change the hour,
enter the hours on the numeric keypad in 24 hour format. New hours will appear in the
display as it is entered. Press . The cursor will proceed to minutes. To
change the minutes, enter the minutes on the keypad in two-digit format. Minutes will be
displayed as entered. Seconds are not entered and will be automatically set as 00. Press
again to proceed to set the date.
Date — Date already set in PIcon II will be displayed. Following the cursor, change the
month by entering the new month on the numeric keypad in two-digit format. The new
month will appear in the display as it is entered. Press and the cursor will
proceed to day of the month. To change the day of the month, enter the day on the
keypad in two-digit format. Day of the month will be displayed as entered. Press
again to proceed to set the year. The year already set in the PIcon II will be
displayed and may be changed by entering the new year on the numeric keypad in four
digits. The new year will display as it is being entered. Press <ENTER> and the year
will be updated.
To exit MGR 5, press the key. MGR 0, the mode entry prompt, will
appear on the display. To return to operator mode, press the key again.