Progressive International Electronics PIcon II Console - Manual (Page 23)

PIcon II Manager
Rev 1.0 January 2014 18
Manager Mode MGR 6 — Beeper Settings
Mode MGR 6 is used to select beeper volume, as well as single or continuous beeps for
Handle, Collect and Drive-Away. (Note: The console defaults to a single beep unless set
otherwise.) To enter MGR 6 from MGR 0, the mode number prompt, enter <6> on the
numeric keypad and press .
Beeper Volume — The first selection of MGR 6 is for Beeper Volume. Using the
key, toggle among High/Low/Off. Pressing cycles to the next
selection.
Handle/Call for Service — The second display prompt is for selection of the style of
beep associated with a Handle/Call for Service. To change the style of beep, press the
key and toggle between Single and Continuous. To proceed to the next option
setting, press .
Collect — The third display prompts for selection of the style of beep associated with a
Collect condition. To change the style of beep, press the key and toggle between
single and continuous. To proceed to the next option setting, press the key.
Drive-Away — The fourth display now prompts for selection of the style of beep
associated with a Drive-Away condition. To change the style of beep, press the
key and toggle between Single and Continuous.