Progressive International Electronics PIcon II Console - Manual (Page 19)

PIcon II Operation
Rev 1.0 January 2014 14
Operator Access
To access PIcon II program and report features, a sequence utilizing a valid PIN Code must first
be entered. Access is divided into two categories — Manager and Operator. The manager, using
a Manager PIN Code, has access to Reports and Manager Modes. Reports functions (Modes
OPR 1 and OPR 2) are available to both the operator and the manager.
Access to Reports functions is accomplished through the entry of a valid Operator PIN Code.
First, press the key. A prompt on the display will ask for your PIN Code. Enter
your Operator PIN Code on the numeric keypad. This number, with a maximum of four digits, is
stored in the PIcon II. Its purpose is to limit access to PIcon II report data. The number 1111 is
the factory default value for the Operator PIN Code. Next, press the key. OPR 0
will appear in the display, prompting for the desired mode number to be entered on the numeric
keypad. Press again to generate the requested Reports function sequence. Press the
key to exit current mode.
Operator Accessible Modes
OPR 1 — Read Reports (Refer to Reports Section, Read Reports)
OPR 2 — Print Reports (Refer to Reports Section, Print Reports)