Lincoln Electric IM10136 VRTEX MOBILE - Manual (Page 14)

A-7 INSTALLATION
VRTEX ® MOBILE
A-7
9.Insertthecouponriserstandintocouponriserbase
untila“click”isheardand/orfelt.SeeFigureA.7.
10. Insertriserarmassemblyontocouponriserstand
andsecureusingtwopins.SeeFigureA.7.
11.Locateunigunattachment(s)andweldcouponsin
theleftsidecomponentcompartment.SeeFigure
A.8.
When welding in virtual reality be mindful of your
real world surroundings and hazards at all times to
avoid injury.
12.Connect USB and audio jack on the audio visual
(A/V)cableclustertothespeakers.
13.Connecttheremainingcablesintheclustertothe
monitor.
14.Connecttheappropriatepowercordatthebackof
the VRTEX ® MOBILE. Only use power cord sup-
pliedbyLincolnElectric ® Company.
15.Makecertaintheinputpowerswitchontherearof
themachineisinthe“on”position.SeeFigureA.9.
CAUTION
FIGURE A.7 – COUPON RISER BASE AND STAND
RISER ARM
ASSEMBLY
COUPON
RISER
STAND
COUPON
RISER
BASE
PINS (2)
FIGURE A.8 – UNIGUN,COUPON
AND ATTACHMENTS
LEFT SIDE
ACCESS PANEL
MACHINE
FRONT
VR SMAW ADAPTER
(OPTIONAL) K3165-3
FIGURE A.9 – INPUT POWER SWITCH
INPUT
POWER
SWITCH
ELECTRIC SHOCk can kill.
•Only qualified personnel should
perform this installation.
• Turn the input power OFF and
unplug the machine from the recep-
tacle before working on this equip-
ment.
• Always connect the VRTEX ® MOBILE to a power
supply grounded according to the National
Electrical Code and local codes.
------------------------------------------------------------
WARNING