Lincoln Electric IM10136 VRTEX MOBILE - Manual (Page 10)

A-3 INSTALLATION
VRTEX ® MOBILE
A-3
Read entire installation section before starting
installation.
SAFETY PRECAUTIONS
SELECT SUITABLE LOCATION
Themachinewillnotoperateinharshenvironments.It
isimportantthatsimplepreventativemeasuresarefol-
lowed in order to assure long life and reliable opera-
tion.ThisproductisforINDOOR USEONLY.
•Dirt and dust that can be drawn into the machine
should be kept to a minimum. Failure to observe
theseprecautionscanresultinexcessiveoperating
temperaturesandnuisanceshutdown.
•Do not locate where monitor is exposed to direct
sunlight.
•Donotplaceequipmentnearradiantheatsources.
•Donotplaceinaconfinedspace.Allowaminimum
of3feetofclearancearoundmachineandstandat
alltimes.Adequateventilationisnecessary.
•The fused power switch on the rear panel is the
inputpowerdisconnectdevice.Donotpositionthe
equipmentsothatitisdifficulttooperatethefused
powerswitch.
•Route and protect power cable to minimize expo-
suretodamage.
•Single or Multi-Outlet surge protector (or Surge
Suppressor) is highly recommended to protect the
machine from voltage spikes going through the
inputline.
ENVIRONMENTAL AREA
Keepthemachineinsideanddryatalltimes.Donot
placeitonwetgroundorinpuddles.Neverplaceliq-
uidsontopofthemachine.
STACkING
TheVRTEX ® MOBILEcannotbestacked.
TILTING
PlacetheVRTEX ® MOBLEdirectlyonasecure,level
surface.
LIFTING
If lifting the VRTEX ® MOBILE is required, use two
straps,eachratedfor500pounds(226.8kg)ormore.
DonotattempttolifttheVRTEX
® MOBILEwithacces-
soriesattachedtoit.
HIGH FREQUENCY INTERFERENCE PRO-
TECTION
ESD SENSITIVITY
This headset eyepiece device may be
sensitivetoelectrostaticdischargeof8kV
or higher. Observe static precautions
such as discharging the body by touching the metal
chassis of the grounded equipment prior to touching
theeyepiece.
------------------------------------------------------------
RADIO FREQUENCY INTERFERENCE
Thissystemcontainsasensitivemagneticpositioning
sensor that can become disturbed in the presence of
conductedRFnoiseinthe8to11Mhzrangeonthe
ACpowerlineofthesystem,oronthegraycablelead-
ingtothePolhemussensor.Disturbancescanmani-
fest themselves in slight jarring of the virtual environ-
ment shown on the LCD display or via the headset
eyepiece.(continued)
ELECTRIC SHOCk can kill.
•Only qualified personnel should
perform this installation.
• Turn the input power OFF and
unplug the machine from the recep-
tacle before working on this equip-
ment.
• Always connect the VRTEX ® MOBILE to a power
supply grounded according to the National
Electrical Code and local codes.
------------------------------------------------------------
WARNING
FALLING EQUIPMENT can cause
injury.
• Lift only with equipment of ade-
quate lifting capacity.
• Be sure machine is stable when lifting.
• Do not operate machine while suspended or
when lifting.
------------------------------------------------------------------------
WARNING
USE CAUTION WHEN OPERATING THIS MACHINE
AROUND OTHER EQUIPMENT.
•Large equipment, such as cranes, may interfere
with the operation of this machine.
• This machine may interfere with the operation of
other equipment in work/training area.
• High frequency processes, such as TIG machines,
may interfere with the operation of this machine.
------------------------------------------------------------
CAUTION