IEI Integration UPC-12AH_GM45 v2.00 - Manual (Page 89)

UPC-12A/GM45 Panel PC
Page 77
6.3.3 Super IO Configuration
Use the Super IO Configuration menu (
602H602H602H602H601H601H
BIOS Menu 6 ) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
Configure ITE8718 Super IO Chipset
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Serial Port1 Address
[3F8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
Serial Port3 Address [3E8]
Serial Port3 IRQ [10]
Serial Port4 Address [2E8]
Serial Port4 IRQ [10]
Select RS232 or RS422/RS485 [BY HARDWARE]
Allows BIOS to select
Serial Port Base
Addresses
ÅÆ Select
Screen
↑ ↓ Select
Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 6: Super IO Configuration
Î Serial Port1 Address [3F8/IRQ4]
Use the Serial Port1 Address option to select the Serial Port 1 base address.
Î
Disabled No base address is assigned to Serial Port 1
Î
3F8/IRQ4 D EFAULT
Serial Port 1 I/O port address is 3F8 and the interrupt
address is IRQ4
Î
3E8/IRQ4 Serial Port 1 I/O port address is 3E8 and the interrupt
address is IRQ4
Î
2E8/IRQ3 Serial Port 1 I/O port address is 2E8 and the interrupt
address is IRQ3
Î Serial Port2 Address [2F8/IRQ3]
Use the Serial Port2 Address option to select the Serial Port 2 base address.
Î
Disabled No base address is assigned to Serial Port 2