IEI Integration UPC-12AH_GM45 v2.00 - Manual (Page 45)

UPC-12A/GM45 Panel PC
Page 33
ƒ Anti-static Discharge: If a user open the rear panel of the panel PC, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.
4.3 Preinstalled Components
The following components are all preinstalled.
ƒ Motherboard
ƒ TFT LCD screen
ƒ DDR2 memory module
ƒ Resistive type touch screen
ƒ Stereo speakers
Preinstalled OEM customizations may include the following.
ƒ Different DDR2 memory module
ƒ Hard disk drive
ƒ CF card
Component installation is described in the following sections.
4.4 Installation and Configuration Steps
The following installation steps must be followed.
Step 1: Unpack the panel PC
Step 2: Install the HDD
Step 3: Install the battery
Step 4: Install the PCIe Mini wireless card
Step 5: Install the PCI expansion card
Step 6: Configure the system
Step 7: Mount the system
Step 8: Connect peripheral devices to the I/O interface panel of the panel PC. Step 0: