IEI Integration UPC-12AH_GM45 v2.00 - Manual (Page 17)

UPC-12A/GM45 Panel PC
Page 5
Power Adapter LED
On: The power adapter is connected to the system
HDD LED
On: HDD Status
On The battery is connected and fully charged
Battery Charging LED
Blinking: Charging the battery
On: The system is on and using battery power
Battery Discharging LED
Blinking: Battery low (10%)
Table 1-2: LCD Front LED Indicators
1.2.2 Bottom Panel
The following is a list of the bottom panel peripheral device connectors on the
UPC-12A/GM45.
ƒ 2 x Audio jacks
ƒ 3 x RS-232 serial port (COM1, COM2 and COM3) connectors
ƒ 1 x RS-232/422/485 serial port (COM4) connector
ƒ 1 x VGA connector
ƒ 4 x USB 2.0 connectors
ƒ 2 x RJ-45 GbE connectors
ƒ 1 x Remote monitor RJ-45 connector
ƒ 1 x Remote COM port by RJ-45 connector
ƒ 1 x CompactFlash® slot
ƒ 1 x PCI expansion card slot
ƒ 1 x 12 V DC power input connector
ƒ 1 x 9 V ~ 28 V DC power input terminal block
ƒ 1 x External power switch connector
The bottom panel also includes the following switches and buttons:
ƒ 1 x Power switch
ƒ 1 x UPS/Battery mode switch
ƒ 1 x AT/ATX power mode switch