2 lan connection – IEI Integration UPC-12AH_GM45 v2.00 User Manual
Page 64
UPC-12A/GM45 Panel PC
Page 52
Figure 4-21: AT/ATX Switch
Step 2:
Adjust the AT/ATX switch. The default mode is ATX mode (
570H570H570H570H570H570H
Figure 4-21
).
4.11.2 LAN Connection
There is one external RJ-45 LAN connector. The RJ-45 connector enables connection to
an external network. To connect a LAN cable with an RJ-45 connector, please follow the
instructions below.
Step 1:
Locate the RJ-45 connectors
on the I/O interface panel of the UPC-12A/GM45
series.
Step 2:
Align the connectors.
Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the I/O interface panel of the UPC-12A/GM45 series.
See
571H571H571H571H571H571H
Figure 4-22
.
Figure 4-22: LAN Connection
This manual is related to the following products: