IEI Integration UPC-12AH_GM45 v2.00 - Manual (Page 72)

UPC-12A/GM45 Panel PC
Page 60
Step 7: Remove the PCIe Mini wireless card from the socket.
Figure 5-2: Wireless Module Location
Step 8: Install the new PCIe Mini wireless card into the PCIe Mini socket.
Step 9: Connect the three antenna cables from the system to the wireless card. Step 0:
5.4.4 SO-DIMM Module Replacement
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the UPC-12A/GM45. Please make sure the purchased SO-DIMM
complies with the memory specifications of the UPC-12A/GM45.
To replace the SO-DIMM module, please follow the steps below.
Step 1: Follow all anti-static procedures . See Section
584H584H584H584H583H583H
5.2 .