3 cpu, cpu cooling kit and dimm installation, 1 lga775 cpu installation, Ooling – IEI Integration IMBA-9454 v4.02 User Manual
Page 94: It and, Dimm, Nstallation

IMBA-9454G Motherboard
Page 76
5.3 CPU, CPU Cooling Kit and DIMM Installation
WARNING:
A CPU should never be turned on without the specified cooling kit
being installed. If the cooling kit (heat sink and fan) is not properly
installed and the system turned on, permanent damage to the CPU and
other electronic components attached to the system may be incurred.
Running a CPU without a cooling kit may also result in injury to the
user.
The CPU, CPU cooling kit and DIMM are the most critical components of the IMBA-9454G.
If any of these components is not installed, the IMBA-9454G cannot operate.
5.3.1 LGA775 CPU Installation
NOTE:
Enabling Hyper-Threading Technology on the system requires meeting
all of the platform requirements listed below:
CPU: An Intel® Pentium 4 Processor (or better) with HT
Technology must be installed
Chipset: An Intel® Chipset that supports HT Technology
OS: An operating system that has optimizations for HT
Technology
WARNING:
CPUs are expensive and sensitive components. When installing the
CPU please be careful not to damage it in anyway. Make sure the CPU
is installed properly and ensure the correct cooling kit is properly
installed.