IEI Integration IMBA-9454 v4.02 - Manual (Page 133)

IMBA-9454G Motherboard
Page 115

EPP The parallel port operates in the enhanced parallel
port mode (EPP). The EPP mode supports
bi-directional communication between the system
and the parallel port device and the transmission
rates between the two are much faster than the
Normal mode.

ECP The parallel port operates in the extended
capabilities port (ECP) mode. The ECP mode
supports bi-directional communication between the
system and the parallel port device and the
transmission rates between the two are much faster
than the Normal mode

EPP+ECP The parallel port is also compatible with both ECP
and EPP devices described above
 Parallel Port IRQ [IRQ7]
Use the Parallel Port IRQ option to set the parallel port interrupt address.

IRQ5 IRQ5 is assigned as the parallel port interrupt address

IRQ7 D EFAULT IRQ7 is assigned as the parallel port interrupt address
 Serial Port3 Address [3E8]
Use the Serial Port3 Address option to select the base addresses for serial port 3

Disabled No base address is assigned to serial port 3

3E8 D EFAULT Serial port 3 I/O port address is 3E8

2E8 Serial port 3 I/O port address is 2E8

2F0 Serial port 3 I/O port address is 2F0

2E0 Serial port 3 I/O port address is 2E0