beautypg.com

7 serial device connection, Figure 5-22: vga connector – IEI Integration IMBA-9454 v4.02 User Manual

Page 115

background image

IMBA-9454G Motherboard

Page 97

Figure 5-22: VGA Connector

Step 3:

Secure the connector. Secure the VGA connector to the external interface by

tightening the two retention screws on either side of the connector.

Step 0:

5.7.7 Serial Device Connection

The IMBA-9454G has a single female DB-9 connector on the external peripheral interface

panel for a serial device. Follow the steps below to connect a serial device to the

IMBA-9454G.

Step 1:

Locate the DB-9 connector. The location of the DB-9 connector is shown in

Chapter 3.

Step 2:

Insert the serial connector.

Insert the DB-9 connector of a serial device into

the DB-9 connector on the external peripheral interface. See Figure 5-23.

See also other documents in the category IEI Integration Hardware: