IEI Integration IMBA-9454 v4.02 - Manual (Page 142)

IMBA-9454G Motherboard
Page 124
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Exit
Configure Remote Access type and parameters

Remote Access
[Disabled]
 Select
Screen
  Select
Item
+ - Change Option
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 12: Remote Access Configuration
 Remote Access [Disabled]
Use the Remote Access BIOS option to enable or disable access to the remote
functionalities of the system.

Disabled D EFAULT Remote access is disabled.

Enabled Remote access configuration options shown below
appear:
Serial Port Number
Serial Port Mode
Redirection after BIOS POST
Terminal Type
These configuration options are discussed below.
 Serial port number [COM1]
Use the Serial Port Number option to select the serial port used for remote access.

COM1 D EFAULT System is remotely accessed through COM1

COM2 D EFAULT System is remotely accessed through COM2