WEATHER GUARD 301 through 338 - Manual (Page 2)

Figure 1. Drawer Removal Instructions
Drawer
5/16-18 x 3/4" Hex Hd. Bolt
Stop Brackets
Front Rollers
CAUTION
Some of the larger drawers
would best be handled by
two people, so as not to
cause injury to your person.
Housing
INSTALLATION
INSTRUCTIONS
DRAWER REMOVAL
1. Open the Drawer until it reaches
the internal Stop Brackets.
2. Remove the Stop Brackets from
each upper inside location.
5/16-18 Blind
Fastener
Mounting
Plate
5/16" Flat
Washer
5/16" Lock
Washer
5/16-18 x 1-1/2"
Hex Hd. Bolt
Figure 2. Preferred Installation
1/2" Hole
2
Handle
5/16-18 Whiz Lock Nut
5/16-18 x 3/4"
Truss Head Screw
3. Put the brackets and bolts into the
drawer for later installation. Install the
Drawer Handle.
4. Carefully pull the drawer com-
pletely out of the housing, setting it
aside. Lift out the Front Rollers. You
are now ready to proceed with the
installation.