Vanguard ATRT-03_03B User Manual
Page 74

REV 7 ATRT-03, ATRT-03A, AND ATRT-03B USER’S MANUAL
68
Type the record number that you would like to erase using the alpha-numeric
keypad and then press the
[ENTER]
key. If you do not know the test record
number, you can first print or view a test record directory using the instructions in
section 3.7.3 and Error! Reference source not found., respectively. The following
screen will be displayed while the record is being erased:
The following screen will be displayed when the test record has been completely
erased:
Press any key to continue. You will be returned to “START-UP” menu.
2. ERASE ALL RECORDS
Press the
[2]
key (ERASE ALL RECORDS) to erase all the test records from the unit’s
internal Flash EEPROM. The following warning screen will be displayed:
You can press the
[STOP]
key to cancel the process and return to the “START-UP”
menu.
Press the
[ENTER]
key to proceed with deleting all the test records from the unit’s
Flash EEPROM. The following screen will be displayed during the erasure process:
The following screen will be displayed when all test records have been completely
erased:
Press any key to return to the “START-UP” menu.
RECORDS ERASED!
ERASING RECORDS
PLEASE WAIT...
ERASE ALL RECORDS!
Are you SURE?
“ENTER” TO CONTINUE
RECORD NUMBER 1
ERASED!
ERASING RECORD
NUMBER: 1
PLEASE WAIT...