Vanguard ATRT-03_03B - Manual (Page 42)

REV 7 ATRT-03, ATRT-03A, AND ATRT-03B USER’S MANUAL
36
i. The following screen will be displayed:
Press any key to continue.
NOTE
The above screen will be displayed if there is currently no data in the unit’s
memory buffer. If a test was previously performed or a test record was
restored from Flash EEPROM or from a Flash drive, the following screen will
be displayed instead:
Press the [1] key (APPEND PREV. DATA) to append the data in the unit’s
working memory to the current test results, or press the [2] key (CLEAR PREV.
DATA) to clear any previous data from the unit’s memory buffer and only save
the current test results.
The following screen will then be displayed:
Press any key to continue to step j.
j. The following screen will be displayed:
Press the [2] key (NO).
RUN ANOTHER TEST?
1.YES
2.NO
3.REPEAT PREV. TEST
TEST SAVED
PREVIOUS DATA IN BUF
08/17/10 10:56:05
1.APPEND PREV. DATA
2.CLEAR PREV. DATA
TEST SAVED