Vanguard ATRT-03_03B - Manual (Page 70)

REV 7 ATRT-03, ATRT-03A, AND ATRT-03B USER’S MANUAL
64
3.7.3. Printing or Viewing the Test Record Directory
Follow the steps below to print a directory of the test records stored in the unit’s Flash EEPROM
(ATRT-03 and ATRT-03A only) or view the directory on the LCD screen (ATRT-03B):
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the [3] key (RESTORE RECORD).
c. The following screen will be displayed:
Press the [2] key (DIRECTORY)
If using an ATRT-03 or ATRT-03A, continue to step d.
If using an ATRT-03B, continue to step e.
d. The following screen will be displayed:
Press the [1] key (FULL DIRECTORY) to print a directory of all the test records stored in
the unit’s Flash EEPROM. The directory will be printed and you will be returned to the
“START-UP” menu.
Press the
[2]
key (SHORT DIRECTORY) to print a directory of the last test records stored
in the unit’s Flash EEPROM. The directory will be printed and you will be returned to the
“START-UP” menu.
Please see Figure 21 for a sample test record directory printout.
PRINT DIRECTORY
1.FULL DIRECTORY
2.SHORT DIRECTORY
1.RESTORE RECORD
2.DIRECTORY
3.ERASE RECORDS
1.ENTER XFMR ID
2.REVIEW RECORD
3.RESTORE RECORD
4.NEXT PAGE
1.TEST XFMR 08/23/10
2.SETUP 08:25:15
3.CALCULATOR
4.DIAG 5.QUICK TST