Vanguard ATRT-03_03B - Manual (Page 54)

REV 7 ATRT-03, ATRT-03A, AND ATRT-03B USER’S MANUAL
48
2. SCROLL TO SELECT
Press the
[2]
key (SCROLL TO SELECT) to scroll through the list of supported
transformer types. The following screen will be displayed:
Press the [PAPER ∧ Contrast] or [PAPER ∨ Contrast] key to scroll
through the list of special transformer types. Press the
[ENTER]
key when you
have found the transformer type that you would like to test. Continue to step d.
d. The following screen will be displayed:
NOTE
If you had entered name plate voltages for a previous test, the following screen
will be displayed instead of the above screen:
Press the
[3]
key if you would like to use the name plate voltage values from
the previous test performed, and then continue to step d.
See below for details about options 1 and 2.
1. YES
Press the [1] key (YES) if you would like to enter the transformer name plate
voltage values. The following screen will be displayed:
Type the H winding name plate voltage value using the numeric keypad. The
screen will be updated as shown below:
ENTER H WINDING
NAME-PLATE VOLTAGE:
1,734 V
ENTER H WINDING
NAME-PLATE VOLTAGE:
V
XFMR NAME PLATE VLTG
1.YES
2.NO
3.USE PREVIOUS DATA
XFMR NAME PLATE VLTG
1.YES
2.NO
SPECIAL TEST LISTING
“UP” TO SCROLL FWD
“DWN” TO SCROLL RVS