Vanguard DMOM‐600 - Manual (Page 44)

Auto‐Ohm 200 S3 / DMOM‐200 S3 / DMOM‐600 USER’S MANUAL REV 2
40
If a USB Flash drive is connected to the unit, continue to step d.
If a USB Flash drive is NOT connected to the unit, continue to step e.
d. The following screen will be displayed:
1. SAVE INTERNALLY
Press the [1] key (SAVE INTERNALLY) to save the test record to the unit’s Flash
EEPROM. Continue to step e.
2. SAVE TO THUMB DRIVE
Press the [2] key (SAVE TO THUMB DRIVE) to save the test record to the
connected USB Flash drive. The following screen will be displayed:
Press any key to return to the “START‐UP” menu.
e. The following screen will be displayed:
Press any key to return to the “START‐UP” menu.
RECORD NUMBER 2
HAS BEEN SAVED!
REC_001 SAVED TO
THUMB DRIVE.
1. SAVE INTERNALLY
2. SAVE TO THUMB DRIVE