Vanguard DMOM‐600 User Manual
Page 25
REV 2 Auto‐Ohm 200 S3 / DMOM‐200 S3 / DMOM‐600 USER’S MANUAL
21
g. The following screen will be displayed:
Type the circuit breaker’s model information using the keypad and then press the
[ENTER]
key.
h. The following screen will be displayed:
Type the circuit breaker’s serial number using the keypad and then press the
[ENTER]
key.
i. The following screen will be displayed:
Type the circuit breaker’s KVA rating using the keypad and then press the [
ENTER
] key.
j. The following screen will be displayed:
Type the operator’s name using the keypad and then press the
[ENTER]
key. All
header information will be saved, and you will be returned to the “START‐UP” menu.
OPERATOR:
_
/
TO POSITION
"ENTER" TO ACCEPT
KVA RATING:
_
/
TO POSITION
"ENTER" TO ACCEPT
SERIAL NUMBER:
_
/
TO POSITION
"ENTER" TO ACCEPT
MODEL:
_
/
TO POSITION
"ENTER" TO ACCEPT