Vanguard DMOM‐600 - Manual (Page 21)

REV 2 Auto‐Ohm 200 S3 / DMOM‐200 S3 / DMOM‐600 USER’S MANUAL
17
3.2 Setting the Date and Time
To set the date and time:
a. Start from the “START‐UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the [4] key (SET TIME)
c. The following screen will be displayed:
Type in the date using the keypad. The following screen will be displayed:
Enter the time using the alpha‐numeric keypad. When the time has been entered, you
will be immediately returned to the “START‐UP” menu.
ENTER TIME
HH:MM:SS
ENTER DATE
MM-DD-YY
1. RECORD ID
2. REVIEW RECORD
3. SAVE/RESTORE RECORD
4. set time
5. set language
1.RUN TEST
2.SETUP
3.QUICK TEST
time: 14:21:34
date: 05/24/11