Vanguard DMOM‐600 - Manual (Page 41)

REV 2 Auto‐Ohm 200 S3 / DMOM‐200 S3 / DMOM‐600 USER’S MANUAL
37
3.5 Working With Test Records
3.5.1. Viewing the Contents of the Working Memory
Whenever a test is performed and the reading is kept, the data is temporarily stored in the
Auto‐Ohm’s working memory. You can view the test reading in the unit’s working memory
using the steps below:
a. Start from the “START‐UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the [2] key (REVIEW RECORD).
c. The following screen will be displayed:
Auto‐Ohm 200 S3 DMOM‐200 S3/DMOM‐600
The basic test record information will be
displayed as shown:
Press the [] key. The test record details
will be displayed as shown below:
1. PRINT TO LCD
Press the [1] key (PRINT TO LCD) to
display the test results on the unit’s
LCD screen. The basic test record
information will be displayed as
shown:
PRINT RECORD
1. PRINT TO LCD
2. PRINT TO PRINTER
08/26/11 07:42:23
Num Tests: 1
1. RECORD ID
2. REVIEW RECORD
3. SAVE/RESTORE RECORD
4. SET TIME
5. SET LANGUAGE
1.RUN TEST
2.SETUP
3.QUICK TEST
time: 14:21:34
date: 05/24/11